Nortel 1110 用户指南
Page 72 of 630
Nortel IP Phone 2001
553-3001-368 Standard 26.00 August 2007
Replacing an IP Phone 2001
Procedure 7
Replacing an IP Phone 2001
Replacing an IP Phone 2001
1
Obtain the node and TN information of the phone you want to replace.
2
Disconnect the IP Phone 2001 that you want to replace.
3
Follow Procedure 1 on
to install and configure the IP Phone 2001.
4
Enter the same TN and Node Number as the IP Phone 2001 you
replaced. The system associates the new IP Phone 2001 with the
existing TN.
replaced. The system associates the new IP Phone 2001 with the
existing TN.
End of Procedure
Removing an IP Phone 2001 from service
Procedure 8
Removing an IP Phone 2001 from service
Removing an IP Phone 2001 from service
1
Disconnect the IP Phone 2001 from the network or turn off the power.
If the IP Phone 2001 was automatically configured, the DHCP lease
expires and the IP address returns to the available pool.
expires and the IP address returns to the available pool.
2
In LD 11, enter OUT at the TN prompt.
End of Procedure
IMPORTANT!
Two IP Phones cannot share the same TN. You must remove the
IP Phone 2001 that is currently using the TN.
IP Phone 2001 that is currently using the TN.