Extreme 10808 安装指南
BlackDiamond 8810 Chassis
Extreme Networks Consolidated XOS Hardware Installation Guide
110
4
Slide the BlackDiamond 8810 shipping carton up over the chassis.
5
Remove all four restraining bolts that hold the chassis to the wood pallet as shown in
.
Figure 54: Restraining bolts holding the BlackDiamond 8810 chassis onto the wood pallet
6
Using each person, place one hand in the empty power supply bay and the other hand in the rear
slot on the back panel of the chassis.
slot on the back panel of the chassis.
WARNING!
Correct lifting procedures for the chassis requires two or more people.
WARNING!
The chassis should be empty to prevent added weight prior to lifting. This will also prevent damage to the system
components due to possible chassis flex when lifting.
components due to possible chassis flex when lifting.
7
Gently lift the chassis off from the wood pallet onto the floor as shown in
.
Figure 55: Correct method for lifting the BlackDiamond 8810 chassis
ASP016B
Lift box
off
chassis
Remove 4 bolts
holding chassis
to pallet
ASP017A