Extreme 10808 安装指南
Pre-Installation Requirements
Extreme Networks Consolidated XOS Hardware Installation Guide
111
NOTE
Save all packaging, bolts, washers, clip locks, and box for future use in the event that the chassis needs to be
moved to another location or returned to Extreme Networks.
moved to another location or returned to Extreme Networks.
Pre-Installation Requirements
The following tools and equipment are required for assembling the BlackDiamond 8810 mid-mount kit
and racking the BlackDiamond 8810 chassis:
and racking the BlackDiamond 8810 chassis:
●
ESD-preventive wrist strap
●
#2 Phillips screwdriver
●
19” helper bracket
●
BlackDiamond 8810 mid-mount kit
●
BlackDiamond 8810 chassis
●
A minimum of two people to help install the chassis into the rack
Assembling the BlackDiamond 8810 Mid-Mount Kit
Follow these steps to assemble the BlackDiamond 8810 mid-mount kit:
1
Using two or more people, place the empty chassis in an upright position on a secure flat surface.
2
Attach the right and left mid-mount bracket to each corresponding side of the chassis using eight
mount screws as shown in
mount screws as shown in
.
Figure 56: Right and left mid-mount brackets attached to the BlackDiamond chassis
ASP034
Mid-Mount
Bracket
Bracket