Extreme 10808 安装指南

Extreme Networks Consolidated XOS Hardware Installation Guide

 shows the front view of the G8X MSM.

The MSM consists of a printed circuit board mounted on a metal panel that acts as the insertion vehicle 
in a BlackDiamond 8810 switch. The module carrier also includes ejector/injector levers and captive 
retaining screws at each end of the module front panel.

The G8X MSM has the following ports:

●

Console port—The DB9 serial console port is used to connect a terminal allowing you to perform 
local management.

●

Management port—The 10/100 Mbps Ethernet management port allows you to connect an Ethernet 
cable directly from your laptop into the management port to view and locally manage the switch 
configurations.

●

Compact flash—You can insert an external compact flash memory card into this port. (See 

 

for more information on Extreme Networks-supported compact flash cards.)

●

8 SFP fiber mini-GBIC data ports—These data ports operate as they do on any other I/O module.

Additionally, the G8X MSM has the following three buttons:

●

A—Use the A button to select the alternate BootROM image when powering-on the G8X MSM 
module. To use the alternate BootROM image, you must hold the A button while pressing the R 
button simultaneously.

●

D—Use the D button of force a system dump. This dumps the debug information into NVRAM; this 
information is available on the next reboot. No core file is created.

●

R—Use the R button to reset the G8X MSM without removing the module from the chassis.

Module status LEDs

SYS/STA

MSTR/DIAG

ERR
ENV

Compact flash

Console port

MGMT port

A

R

D

Mini-GBIC

fiber ports

ASP038