LiteOn lvc-9015g 用户指南

12

1. Press [Setup] on the remote control to display the setup

menu.

2. Select “Clock” using [

] or [] and press [ENTER].

3. Select “Clock Source” using [

] or [] and press [ENTER].

4. Select “Auto” or “ Manual” using [

] or [] and press

[ENTER].
When “ Manual” is selected, go back to the same level of menu
as “Clock Source” by pressing [

]. Go to “Date” and “Time” to

adjust the settings with [

]/[] or the  0~9 buttons and confirm

with [ENTER].

Date --> Month/Day/Year
Time --> Hour/Minute/Second/AM(PM)

When “Auto” is selected, go back to the same level of menu as
“Clock Source” by press [

]. Go to “Time Zone” and “Daylight

Sav.” to adjust the settings with [

]/[] and confirm with

[ENTER].

Time Zone --> Refer to “ GUI Operation” section
Daylight Sav. --> Auto/On/Off

Check that the time and date are correctly set before
programming the timer recording. If the time is incorrectly set,
you may not achieve desired timer recording result.

PCM / Bit Stream
(Enable digital audio output with PCM or encoded data)

ON / OFF

STEREO

DOLBY        DTS

You can change the video output mode when you press

[SETUP] button to select “System-->Video Output-->

Progressive”.

(Video will not be displayed correctly when connecting to an

incompatible television.)

480i: Interlace video

480p: Progressive video

1. Press the [SETUP] button and the setup menu will be

displayed.

2. Select “System” using [

] or [] and press [ENTER].

3. Select “video output” as “COMPONENT” or “PROGRESSIVE”
using [

] or [] and press [ENTER].

Select “4:3” (regular) or “16:9” (widescreen) to suit your
television. If you have a regular 4:3 television, you can also

select how video on some DVD discs is presented.

(select when you connect the unit to a
normal (4:3) TV.)
When playing back a DVD-VIDEO disc
recorded in wide picture format, the
picture is shown with black bars at the
top and bottom.

(select when you connect the unit to a
normal (4:3) TV.)
When playing back a DVD-VIDEO disc
recorded in wide picture format, the
picture is zoomed to fill the screen
vertically, and the left and right sides of
the image are chopped off. Note, however, that the picture will
be shown in the 4:3 LB mode even if you select the 4:3 PS
mode depending on the disc.

(select when you connect the unit to a
wide-screen (16:9) TV.)

You cannot change the “Aspect Ratio” setting during playback.

4. When all settings are correct, press [

] repeatedly to return

to the main menu or  press the [SETUP] button to exit the setup
menu.

1. Press [ 

 POWER] to turn on the unit.

2. Press [SETUP] to display the setup menu.
3. Press [

] [] to move up and down to select “System”,

“Clock,” “Language”, “Playback”, “Record”, “Audio”, “TV
Tuner” or “EXIT.” Press [

] or [] to go to the next or return

to the previous menu.

4. The key settings are:

System  --- Video Output
Clock--- Date ---> Time
Language  --- OSD
Playback -- Aspect Ratio
Record  --- DVD Quality ( HQ, SP, LP, EP and SLP )

Tape Quality (SP and SLP)

Audio     --- Digital Output  (PCM / Bit Stream)

5. Press [ENTER] to save the settings.
6. Press [SETUP] again to exit the setup menu or press [

] to

return to the previous menu. Select “EXIT” and press
[ENTER] to exit the setup menu.

To record TV programs using the timer record feature, you must
set the time accurately.

This Chapter allows you to customize the DVD Recorder+VCR to
meet your system requirements and set your personal preferences.

If you accidentally enter progressive scan mode and want to
exit it, press [

] and the numbered buttons of “6,” “0,” “9, ” “9”

and [ENTER]. The unit will be turned off. Press [POWER] to
switch it on.