LiteOn lvc-9015g 用户指南
14
Channel Editor
Before channel editing
Ensure that the antenna cables are securely connected up to
the unit.
Adding or deleting TV channels manually
1.Turn on the TV set and the unit, and switch
your TV’s input source to “AV.”
your TV’s input source to “AV.”
2. Press [SOURCE] on the unit’s remote control
to switch to “TV.”
to switch to “TV.”
3.Press [EDIT] to bring up the “Channel Editor”
menu, press [
menu, press [
] [] to select one of the TV
channels and press [ENTER].
Move the cursor to the TV channel to make the selection and
press [ENTER] again to cancel the delete operation.
press [ENTER] again to cancel the delete operation.
4. Repeat as necessary.
5. When finished, press [
5. When finished, press [
] [][] [] to
select “EXIT.” Press [ENTER] to save the
setting and exit the “Channel Editor” menu.
setting and exit the “Channel Editor” menu.
Renaming TV channels
1. At the “Channel Editor” menu, press [
] []
to select one of the TV channels and press [
].
2.Press [
] [] to select “Rename” and press
[ENTER].
The keypad for entering a title name is displayed.
3.Select the desired characters from the
keypad. Press [ENTER] after each entry.
keypad. Press [ENTER] after each entry.
Moving TV channels up or down
1.At the “Channel Editor” menu, press [
] []
to select one of the TV channels and press [
].
2.Press [
] [] to select “Move Up” or “Move
Down” and press [ENTER].
The channel moves up or down the list.
Each time you press [
Each time you press [
] [] and the item changes as follows.
3. Repeat as necessary.
4. When finished, press [
4. When finished, press [
] [][] [] to
select “EXIT.” Press [ENTER] to save the
setting and exit the “Channel Editor” menu.
setting and exit the “Channel Editor” menu.
Inserting new TV channels
1.At the “Channel Editor” menu, press [
] []
to select one of the TV channels and press [
].
2.Press [
] [] to select “Insert to” and press
[ENTER].
3.Press [
] [][] [] to enter the “Channel
number,” and press [ENTER].
The channel moves to the new position.
4. Repeat as necessary.
5. When finished, press [
] [][] [] to
select “EXIT.” Press [ENTER] to save the
setting and exit the “Channel Editor” menu.
setting and exit the “Channel Editor” menu.
Swapping TV channels
This function allows you to manually change the TV channel
positions stored in the unit to match the ones stored in your TV
set.
positions stored in the unit to match the ones stored in your TV
set.
1.At the “Channel Editor” menu, press [
] []
to select one of the TV channels and press [
].
2.Press [
] [] to select “Swap with” and
press [ENTER].
3.Press [
] [][] [] to enter a channel
number and press [ENTER].
The channel will change its position.
4.Repeat as necessary.
5.When finished, press [
] [][] [] to
select “EXIT.” Press [ENTER] to save the
setting and exit the “Channel Editor” menu.
setting and exit the “Channel Editor” menu.
4.When finished, press [
] [][] [] to
select “EXIT.” Press
[ENTER] to save the
setting and exit the
“Channel Editor”
menu.
[ENTER] to save the
setting and exit the
“Channel Editor”
menu.
Notes:
You only can enter up to 5
characters for a name.
characters for a name.