LiteOn lvc-9015g 用户指南
16
Recording
Before recording
This unit records on CD-R/-RW, DVD-R/RW, DVD+R/RW discs
and VHS tapes. Please use qualified recordable discs/VHS tapes
to ensure best recording quality. Check our Web site for the
qualified media list.
and VHS tapes. Please use qualified recordable discs/VHS tapes
to ensure best recording quality. Check our Web site for the
qualified media list.
Note:
For discs:
1. CD-R is a write-once disc media and CD-RW is a re-writable
disc media.
2. DVD+R/-R is a write-once disc media and DVD+RW/-RW is a
1. CD-R is a write-once disc media and CD-RW is a re-writable
disc media.
2. DVD+R/-R is a write-once disc media and DVD+RW/-RW is a
re-writable disc media.
3. Before playing a DVD+R/DVD-R/DVD-RW/CD-R/CD-RW disc
on compatible equipment, you will need to finalize the disc.
4. You cannot add new recording session to DVD-R/DVD-RW/
DVD+R discs after the disc is finalized.
5. In some cases, you may not be able to add new recording
sessions to a recordable DVD disc that contains sessions
recorded by other DVD-Recorders.
6. If a power failure occurs, the program you are recording may
be lost.
For VHS tapes:
Break the video cassettes’ tab to prevent accidental erasure. Cover
the hole with a double layer of adhesive tape when you want to use
the VHS tapes for recording again.
on compatible equipment, you will need to finalize the disc.
4. You cannot add new recording session to DVD-R/DVD-RW/
DVD+R discs after the disc is finalized.
5. In some cases, you may not be able to add new recording
sessions to a recordable DVD disc that contains sessions
recorded by other DVD-Recorders.
6. If a power failure occurs, the program you are recording may
be lost.
For VHS tapes:
Break the video cassettes’ tab to prevent accidental erasure. Cover
the hole with a double layer of adhesive tape when you want to use
the VHS tapes for recording again.
5.Press [VHS] to [DVD] to select the target
recording device.
recording device.
VHS tapes begin recording at the position where it was left. You
must select the desired recording location on the tape.
must select the desired recording location on the tape.
Press [RECORD] to start recording.
After [RECORD] is pressed, it may take the unit a few seconds to
initialize.
initialize.
Recording continues until it’s manually stopped or when disc or the
VHS tape is full.
VHS tape is full.
To stop recording
When you press [
STOP] , it may take a few moments for
recording to stop and the session to close.
To pause recording
Press [ PAUSE] to pause recording, and press [ PAUSE] or
[RECORD] to resume recording.
[RECORD] to resume recording.
To change the recording mode.
Press [SETUP] --> DVD Quality or Tape Quality.
DVD Quality
VHS tape
Notes:
You cannot change the recording mode once a recording session
has begun. The new setting won’t be valid until the next recording
session.
has begun. The new setting won’t be valid until the next recording
session.
To check the media status while recording
Press [DISPLAY] , the recording information is displayed.
Recording television programs
1.Press [ POWER] to turn the unit on.
2.Make sure that a recordable disc or a VHS tape
is inserted or loaded for recording.
is inserted or loaded for recording.
When you insert a new recordable DVD disc for recording, the
recorder will automatically start the disc preparation process.
When you insert a new recordable CD-R/RW disc for recording,
you need to first specify a disc format for the unit to prepare the
disc as (Audio CD, VCD or SVCD)
recorder will automatically start the disc preparation process.
When you insert a new recordable CD-R/RW disc for recording,
you need to first specify a disc format for the unit to prepare the
disc as (Audio CD, VCD or SVCD)
.
3.Press [SOURCE] and [
] [] to select “TV”
as the signal input source.
4.Press [ CH
] or press [
] [] to select a
channel you want to record.
You can also use the number buttons on the remote control to
enter the desired channel number. Press [ENTER] after the desired
channel number is selected.
enter the desired channel number. Press [ENTER] after the desired
channel number is selected.
Note:
Once recording has begun, you can not change the channel.