LiteOn dd-500g 用户指南

Getting Started



Setting HDMI resolution may affect the mode of video

output

from component jack and the corresponding

setting in the Setup menu. When this recorder and your

TV are connected up by an HDMI cable: If ‘480p’,

‘720p’ or ‘1080i’ is manually selected or automatically

set by system as the resolution, ‘Video Output’ will

be switched to ‘Progressive’ (progressive scan mode).



If the setting is ‘Auto’ with 480i as the output resolu-

tion, ‘Video Output’ will be ‘Component’ (interlaced

scan mode).



Once the HDMI cable is disconnected, Video Output

will change to ‘Component’ (interlaced scan mode) if

the setting of HDMI resolution is‘Auto’. Otherwise,

Video Output will be ‘Progressive’.

Setting Aspect Ratio

Aspect ratio setting affects how video images are pre-

sented. Select the mode which suits your television.

1.    Press SETUP to display the Setup menu.
2.    Change the setting through Playback Aspect Ratio.
3.    If you connect the DVD recorder to a widescreen(16:9)

TV, select ‘16:9 Wide’ (16:9 Widescreen).

Started_SystemSetup_07_03

4. If you connect the DVD recorder to a normal (4:3)

TV, select either ‘4:3 L.Box’ (4:3 Letter Box) or ‘4:3

Pan’ (4:3 Pan & Scan). However, when playing back a

DVD-Video disc recorded in wide picture format, the

picture shown on screen is different.
1. If you select ‘4:3 L.Box’:

Started_SystemSetup_07_05

The picture is shown with black bars at the top and bottom.

2. If you select ‘4:3 Pan’ (4:3 Pan & Scan):

Started_SystemSetup_07_04

The picture is zoomed to ﬁll the screen vertically, and the left

and right sides of the image are chopped off. Please note that

depending on the disc, the picture may be shown in the 4:3 L.Box

(4:3 Letter Box) mode even if you select the 4:3 Pan (4:3 Pan &
Scan) mode.

Setting Parental Control

Some DVD-Video discs are encoded with a Parental

Management Level(PML) numbered from 0 to 8. You

can set the parental control level of this DVD recorder to

one of the numbers, then only a DVD-Video disc with the

PML equal to or lower than the one you set can be played

back by this DVD recorder.

1. Press SETUP to display the Setup menu.
2. Change the level of parental control through

PlaybackParental Lock.

3. If the level you select is different from the one you set

before, an input box asking for password will appear.

Enter 4-digit password by pressing number buttons(0-

9).

The default password is 0000.

If you press or ENTER instead of number buttons,

you will return to the upper level of the menu without

making any change.

4. If the password you enter is correct, the change you

made will be applied. Otherwise, the change will be

ignored.



If you try to play back a DVD Video disc prohibited

by the parental control, you will be asked to enter your

4-digit password. Once the password is correct, the

playback will start.