Lexicon MC-12 用户指南
Lexicon
MC-12 Serial Communications Protocol
MC-12 Serial Communications Protocol
Printed on: 07/13/05
7.1.5 MC-12 Parameter Notification by Id (MC-12)
MC-12 will transmit parameter change notifications if they are enabled using the command described in
. If a parameter value is changed due to any user action
or system action the MC-12 will transmit the current value of the parameter that is changing.
7.1.5.1 Command Packet Description
Application Header:
Command MC_PARAM_NOTIFICATION_BY_ID
0x05
Data Count
24
0x18
Application Data:
Data[0] ParamId(LSB)
nn
Data[1] ParamId(MSB)
nn
Data[2] ParamType
nn
Data[3-23] Value[0
-20]
nn nn
nn…
nn…
7.1.5.2 Data Description
Same as
7.1.5.3 HOST Response
The MC-12 does not expect any response from the HOST.
7.1.5.4 Defaults
The following Parameters Notifications are Enabled in the MC-12 default state:
© 2005 Harman Specialty Group All rights reserved.
15 of 106