3com S7906E 安装指导

 

2-4 

Enter system view 

— 

Define a static route for 
a VPN instance 

ip route-static vpn-instance 
s-vpn-instance-name&<1-5> dest-address 
{ mask | mask-length } { gateway-address 
[ public ] | interface-type interface-number 
[ gateway-address ] | vpn-instance 
d-vpn-instance-name gateway-address } 
[ preference preference-value ] [ tag 
tag-value ] [ description description-text ] 

Required 

This operation is 
performed on the MCE 
device. The 
corresponding 
configuration on the site is 
the same as configuring a 
normal static route.  

 

A RIP process can be bound to only one VPN instance. RIP processes not bound to any VPN instances 

belong to the public network.  

Follow these steps to configure RIP between a MCE and a site: 

Enter system view 

— 

Enable RIP for a VPN 
instance (This 
operation also leads 
you to RIP view) 

rip [ process-id ] 
vpn-instance 
vpn-instance-name 

Required 

This operation is performed on the MCE 
device. As for the corresponding 
configuration on the site, you can just 
enable RIP as usual. 

Redistribute routes 
from the remote site 
advertised by the PE 

import-route protocol 
[ process-id ] [ allow-ibgp ] 
[ cost cost | route-policy 
route-policy-name | tag tag ] *

 Required 

By default, RIP does not redistribute 
routes from other protocols.  

 

After enabling RIP for a VPN instance, you need also to configure to use RIP for routing information 

exchange. 

 

An OSPF process can be bound to only one VPN instance. OSPF processes not bound to any VPN 

instances belong to the public network.  

Follow these steps to configure OSPF between a MCE and a site: