3com S7906E 安装指导
2-6
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable IS-IS for a
VPN instance and
enter IS-IS view
VPN instance and
enter IS-IS view
isis [ process-id ]
vpn-instance
vpn-instance-name
vpn-instance
vpn-instance-name
Required
This operation is performed on the MCE device.
As for the corresponding configuration on the
site, you can just enable IS-IS as usual.
As for the corresponding configuration on the
site, you can just enable IS-IS as usual.
Redistribute routes
from the remote site
advertised by the PE
from the remote site
advertised by the PE
import-route { isis
[ process-id ] | ospf
[ process-id ] | rip
[ process-id ] | bgp
[ allow-ibgp ] | direct |
static } [ cost cost |
cost-type { external |
internal } | [ level-1 |
level-1-2 | level-2 ] |
route-policy
route-policy-name | tag
tag ] *
[ process-id ] | ospf
[ process-id ] | rip
[ process-id ] | bgp
[ allow-ibgp ] | direct |
static } [ cost cost |
cost-type { external |
internal } | [ level-1 |
level-1-2 | level-2 ] |
route-policy
route-policy-name | tag
tag ] *
Required
By default, IS-IS does not redistribute routes
from other protocols.
from other protocols.
Without the level specified, the command
redistributes routes to the Level-2 routing table
by default.
redistributes routes to the Level-2 routing table
by default.
After enabling IS-IS for a VPN instance, you need also to configure to use IS-IS for routing information
exchange.
Configuring to Use EBGP between a MCE and a Site
1) Configuration on the MCE device
Follow these steps to configure an MCE device:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter BGP-VPN instance view
ipv4-family vpn-instance
vpn-instance-name
vpn-instance-name
Required
Configure a CE as a VPN peer
peer { group-name |
ip-address } [ as-number
as-number ]
ip-address } [ as-number
as-number ]
Required
Redistribute routes from the
remote site advertised by the
PE
remote site advertised by the
PE
import-route protocol
[ process-id ] [ med med-value |
route-policy
route-policy-name ] *
[ process-id ] [ med med-value |
route-policy
route-policy-name ] *
Required
By default, EBGP does not
redistribute routes from other
protocols.
redistribute routes from other
protocols.
Apply a filter policy to the routes
to be advertised
to be advertised
filter-policy { acl-number |
ip-prefix ip-prefix-name }
export [ direct | isis process-id
| ospf process-id | rip
process-id | static ]
ip-prefix ip-prefix-name }
export [ direct | isis process-id
| ospf process-id | rip
process-id | static ]
Optional
By default, routes to be
advertised are not filtered.
advertised are not filtered.