3com S7906E 参考指南
1-1
1
MBGP Configuration Commands
z
The term “router” in this document refers to a generic router or an Ethernet switch running routing
protocols.
z
For information about route policy commands, refer to Route Policy Commands in the IP Routing
Volume.
MBGP Configuration Commands
aggregate (MBGP family view)
Syntax
aggregate ip-address { mask | mask-length } [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy route-policy-name ] *
undo aggregate ip-address { mask | mask-length }
View
IPv4 MBGP address family view
Default Level
2: System level
Parameters
ip-address: Summary address.
mask: Summary mask, in dotted decimal notation.
mask-length: Summary mask length, in the range 0 to 32.
as-set: Creates a summary with AS set.
attribute-policy route-policy-name: Sets the attributes of the summary route according to the route
policy. The route policy name is a string of 1 to 19 characters.
detail-suppressed: Advertises the summary route only.
suppress-policy route-policy-name: Suppresses specific routes defined in the route policy. The route
policy name is a string of 1 to 19 characters.
origin-policy route-policy-name: References the route policy to determine routes for summarization.
The route policy name is a string of 1 to 19 characters.
The keywords of the command are described as follows: