3com S7906E 参考指南
1-26
Parameters
pse pse-id: Specifies a PSE ID.
Description
Use the poe legacy enable command to enable the PSE to detect nonstandard PDs.
Use the undo poe legacy enable command to disable the PSE from detecting nonstandard PDs.
By default, the PSE is disabled from detecting nonstandard PDs.
Examples
# Enable PSE 7to detect nonstandard PDs.
<Sysname> system-view
[Sysname] poe legacy enable pse 7
poe max-power
Syntax
poe max-power max-power
undo poe max-power
View
PoE interface view, PoE-profile file view
Default Level
2: System level
Parameters
max-power: Maximum power in milliwatts allocated to a PoE interface. The range of this argument
varies with devices.
Description
Use the poe max-power command to configure the maximum power for a PoE interface.
Use the undo poe max-power command to restore the default.
By default, the maximum power of the PoE interface is 15,400 milliwatts.
Examples
# Set the maximum power of Ethernet 2/0/1 to 12,000 milliwatts.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] poe max-power 12000
# Set the maximum power of Ethernet 2/0/1 to 12,000 milliwatts through a PoE configuration file.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe max-power 12000
[Sysname-poe-profile-abc-1] quit
[Sysname] interface ethernet 2/0/1