3com S7906E 参考指南
1-13
# Redistribute OSPF routes with the cost being the default cost.
[Sysname-rip-1] import-route ospf
maximum load-balancing (RIP view)
Syntax
maximum load-balancing number
undo maximum load-balancing
View
RIP view
Default Level
2: System level
Parameters
number: Maximum number of load balanced routes, in the range 1 to 4.
Description
Use the maximum load-balancing command to specify the maximum number of load balanced routes
in load sharing mode.
Use the undo maximum load-balancing command to restore the default.
By default, the maximum number of load balanced routes is 4.
Examples
# Specify the maximum number of load balanced routes as 2.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] maximum load-balancing 2
network
Syntax
network network-address
undo network network-address
View
RIP view
Default Level
2: System level
Parameters
network-address: IP address of a network segment, which can be the IP network address of any
interface.