3com S7906E 参考指南
1-21
Description
Use the display pim ipv6 rp-info command to view the RP information.
Note that:
z
The RP information includes the information of RPs dynamically found by the BSR mechanism and
static RPs.
z
Because a non-BSR router refreshes its local RP-Set only based on the received BSR bootstrap
messages, the system does not delete an RP even if its expiry time is 0. Instead, the system waits
for the next bootstrap message from the BSR: if the bootstrap message does not contain
information of the RP, the system will delete it.
Examples
# View the RP information corresponding to the IPv6 multicast group FF0E::101.
<Sysname> display pim ipv6 rp-info ff0e::101
PIM-SM BSR RP information:
prefix/prefix length: FF0E::101/64
RP: 2004::2
Priority: 0
HoldTime: 130
Uptime: 00:05:19
Expires: 00:02:11
Table 1-9 display pim ipv6 rp-info command output description
Field
Description
prefix/prefix length
The IPv6 multicast group served by the RP
RP
IPv6 address of the RP
Priority
RP priority
HoldTime
Timeout time of the RP
Uptime
Length of time since the RP was elected
Expires
Remaining time of the RP
embedded-rp
Syntax
embedded-rp [ acl6-number ]
undo embedded-rp [ acl6-number ]
View
IPv6 PIM view
Default Level
2: System level