3com S7906E 参考指南
1-3
z
Use the group-id argument to specify the port mirroring group to be removed.
z
Use the all keyword to remove all the port mirroring groups.
z
Use the local keyword to remove all the local port mirroring groups.
z
Use the remote-destination keyword to remove all the remote destination port mirroring groups.
z
Use the remote-source keyword to remove all the remote source mirroring groups.
Examples
# Create a local port mirroring group numbered 1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
# Create remote destination mirroring group numbered 2.
<Sysname> system-view
[Sysname] mirroring-group 2 remote-destination
mirroring-group mirroring-port
Syntax
mirroring-group group-id mirroring-port mirroring-port-list { both | inbound | outbound }
undo mirroring-group group-id mirroring-port mirroring-port-list { both | inbound | outbound }
View
System view
Default Level
2: System level
Parameters
group-id: Port mirroring group number, in the range of 1 to 4.
mirroring-port-list: List of ports to be added to the port mirroring group. You can specify multiple ports by
providing this argument in the form of { interface-type interface-number [ to interface-type
interface-number ] }&<1-8>, where the interface-type argument is port type, the interface-number
argument is the port number, and &<1-8> means that you can provide up to eight port indexes/port
index lists for this argument.
both: Specifies to duplicate both inbound and outbound packets.
inbound: Specifies to duplicate inbound packets only.
outbound: Specifies to duplicate outbound packets only.
Description
Use the mirroring-group mirroring-port command to configure source ports for a port mirroring
group.
Use the undo mirroring-group mirroring-port command to remove source ports from a port mirroring
group.
Note that:
z
The source port cannot be a member port of the current mirroring group.
z
A remote destination mirroring group cannot contain source mirroring ports.