Xerox 4260s 用户手册

quick use guide

•

Press the Machine Status button then select Tools > Connectivity and
Network Setup > Advanced > Network Setting > Network Setup > TCP/IP
Options > TCP/IP Settings.

•

The allocated TCP/IP address is in the Name/Address field.

Confirm that an IP address has been allocated and that it is an appropriate IP
address for your network.

NOTE:

If the IP address starts with 169.xxx.xxx.xxx, the DHCP server has not properly

allocated an address or DHCP is not enabled on your network. Contact your network
administrator for assistance.

Network Setup Using a Static IP Address

Before you begin, obtain the following information from your network administrator:

•

IP Address

•

Gateway Address

•

Subnet Mask

•

DNS Server Address

Press the Log In/Out button on the
Control Panel, enter the Administrator’s
Password [1111] and select Enter.

Press the Machine Status button then
select Tools > Connectivity and
Network Setup > Advanced > Network
Setting > Network Setup > TCP/IP
Options.

Select HTTP and Enable. Select Save.

Select TCP/IP Settings.

Select the Dynamic Addressing button.
By default, DHCP will be selected. Select
Disabled to disable DHCP and select Save.

Select Name/Address. Enter the Host Name, by selecting the Keyboard symbol.
Enter the IP Address by touching each box and entering the number using the
Numeric Keypad

. Select Save.

Select Subnet and Gateway. Enter the Subnet Mask and IP Gateway. Select Save.

If you do not wish to configure DNS settings proceed to the next step. If you wish to
configure DNS settings select the DNS Configuration button. Enter the Domain
Name

and the Preferred DNS Server address. Select Save.

The static IP address is now set. Press the Log In/Out button and select Confirm to
logout and close the Tools menu.