Xerox 6500dn 用户指南

Control Panel Menus

Phaser 6500 Color Laser Printer

User Guide

97

Maintenance Mode Menu

Use this menu to configure color registration and to reset defaults.

Odd Page 2-Sided
(Phaser 6500DN printer 
configuration only)

If the optional duplex unit is installed, this item tells the printer how to 
handle the last odd page in a 2-sided print job.
• 1-sided
• 2-sided

Power On Wizard

Resets the Power On Wizard. The first time the printer is turned on, a special 
menu appears on the printer control panel. Use it to configure initial 
settings such as language, default paper size, and network settings. This 
setting enables the administrator to reset the Power On Wizard so that the 
special menu appears when the printer is turned on.

F/W Version

Displays the current firmware version installed in the printer.

Auto Regi Adj.

Auto Registration Adjust. When On (the default), the color registration is 
adjusted automatically.

Adjust Color Regi.

Adjust Color Registration. Used to correct the color registration between 
colors. For details, see 

• Auto Adjust: Use to force an automatic color registration correction.
• Color Regi Chart: Prints the color registration chart used to check for 

correct color registration.

• Enter Number: Use to select and correct color registration numbers. 
• Fast Scan (1): For setting horizontal color registration, or Slow Scan (2) 

for setting vertical color registration.

Clear Developer

Resolves print-quality defects associated with charge problems after 
high-coverage print jobs.

Toner Refresh

Resolves print-quality defects associated with charge problems after 
low-coverage jobs.

IU Refresh (Imaging Unit 
Refresh)

Helps improve imaging unit operation by performing a density and color 
curve calibration.

Init Print Meter

Initialize Print Meter. Resets the Print Meter.

Initialize NVM

Resets the settings in the nonvolatile memory (NVM), except for the 
network settings, to their defaults. NVM is memory that stores the printer 
settings even after the power is turned off. After selecting this option and 
restarting the printer, all the menu settings are reset to their default values.

Note:
•

You cannot execute the Initialize NVM setting during printing.

•

After changing this setting, turn off the printer and then turn it on 

again to activate the change.