Xerox 6500dn 用户指南

Control Panel Menus

Phaser 6500 Color Laser Printer
User Guide

98

PCL Setup Menu

Use this menu to configure settings for PCL. The PCL driver is used for applications requiring PCL. For 
PCL print driver options, see 

on page 63.

Clear Storage

Deletes documents stored in the RAM in the printer.

Reset Fuser

Resets the fuser life counter to the starting point (0).

Paper Tray

Specifies the paper tray to use when the Paper Tray setting in the PCL print 
driver is set to Auto Select.
• Auto  (default)
• Tray  1
• Tray 2 (optional; if installed)
• Manual  Feed  Slot

Paper Size

Specifies the default paper size to print.

Orientation

Specifies the default paper orientation:
• Portrait (default)
• Landscape

2-Sided

Specifies 2-sided printing settings:
• 2-Sided Print: Specifies whether to perform 2-sided printing. The default 

is Off. The default setting is ON when the duplex unit is installed.

• Binding Edge: Specifies the binding direction from Flip Long Edge 

(default) or Flip Short Edge.

Font

Specifies the font to use. The default font is Courier.

Symbol Set

Specifies the font to use for symbols. The default is Roman-8.

Font Size

Specifies the font size. The default size is 12.00. You can specify a value 
from 4.00 through 50.00 in increments of 0.25. Available only for 
typographic fonts.

Font Pitch

Specifies the character spacing. You can specify a value from 6.00 through 
24.00 in increments of 0.01. The default is 10.00. 

Form Line

Specifies the form line (the number of lines per form). You can specify a 
value from 5 through 128 in increments of 1. The default is 60.

Quantity

Specifies the number of copies to print. You can specify a value from 1 
through 999. The default is 1.