Xerox 3535 快速安装指南
6
Quick Start Guide
Preparing to print
To set up your Fiery, you must perform the following tasks:
• Connect the Fiery physically to a functioning network.
• Configure the network server.
• Set up the Fiery from the Copier Control Panel and from Command WorkStation
or WebSetup.
• Prepare client workstations for printing.
A brief explanation of each task follows.
Connecting the Fiery to a functioning network
N
OTE
:
When you add the Fiery to a network, it is assumed that a network
administrator has already installed a network cabling system and has connected
workstations and servers. For examples of different networks, see the
workstations and servers. For examples of different networks, see the
Other Network Requirements
UNIX (TCP/IP) workstation
• Standard TCP/IP connectivity (for example, Sun SPARCStation or Silicon Graphics
workstation with Solaris version 2.6 or later or SunOS version 4.1.x software or RedHat
Linux version 7.2)
Linux version 7.2)
• TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)
IPX (Novell) network
• Novell server
• Novell NetWare software version 4.x or 5.x
• NDPS gateway in Netware 5.x
• Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, and Ethernet 802.2 frame types
• Novell NetWare software version 4.x or 5.x
• NDPS gateway in Netware 5.x
• Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, and Ethernet 802.2 frame types