Xerox 3535 快速安装指南
7
Preparing to print
T
O
CONNECT
THE
F
IERY
TO
A
NETWORK
1.
Prepare a network node for the Fiery.
2.
Route the cable to a location near the copier where the Fiery will be installed, and
attach the cable to the network interface of the Fiery.
attach the cable to the network interface of the Fiery.
3.
Print a copier Test Page to verify the copier is functioning normally.
For detailed instructions, see the
.
Configuring the network server
If you require a network server, you must configure that server to provide client access
to the Fiery as a color printer. To configure a network server in a Windows or UNIX
network environment, see the
to the Fiery as a color printer. To configure a network server in a Windows or UNIX
network environment, see the
. For Novell and Windows NT/
2000 (using TCP/IP) networks, the network servers must be configured for printing to
the Fiery before you configure Fiery network settings in Setup. For more information,
see the
the Fiery before you configure Fiery network settings in Setup. For more information,
see the
Setting up the Fiery from the Copier Control Panel
Setup configures the Fiery to communicate with other devices and manage print jobs.
You must perform Setup the first time you turn on the Fiery after new system software
is loaded, or any time Server software is reinstalled. Initial Setup must be performed at
the Fiery Copier Control Panel (for Network Setup) and from Command WorkStation
or WebSetup (for Server Setup and Printer Setup).
You must perform Setup the first time you turn on the Fiery after new system software
is loaded, or any time Server software is reinstalled. Initial Setup must be performed at
the Fiery Copier Control Panel (for Network Setup) and from Command WorkStation
or WebSetup (for Server Setup and Printer Setup).
Perform the following Setup options in the order listed:
•
Network Setup
—specifies all the active network systems that transmit print jobs to
the Fiery.
•
Server Setup
—specifies system options.
•
Printer Setup
—specifies how print jobs and queues are managed.
N
OTE
:
This is the minimum setup required to enable your Fiery to begin printing.
To configure network settings in Setup, you need a live network connection so the
Fiery can query the network for zones, servers, and server-based queues.
Fiery can query the network for zones, servers, and server-based queues.