Xerox 5790 参考指南

USAGE GUIDELINES

12

REGAL 5790 MATERIALS USAGE GUIDE

•

There are a wide variety of hole configurations available. Not all 
variations have been tested.  Frequent jams are possible with 
some hole configurations.  Pretesting a small quantity is 
recommended before making a large purchase.

Pressure-sensitive label stock consists of three layers: the face 
sheet, the pressure-sensitive adhesive, and the backing or release 
sheet.  There are many types of face sheets and label weights 
available.  To avoid feeding and image quality problems, it is very 
important to run labels with the correct balance of properties. The 
recommended Xerox copier/printer labels have been specifically 
designed to give optimum performance in the 5790.  They have low 
weight/low stiffness for improved feeding, and have a pattern-
printed adhesive (no adhesive within 1/16 inch of the edges of the 
sheets) to reduce fuser contamination.

Xerox 1-up Copier Labels  8.5 x 11” = 3R4473
Xerox 8-up Copier Labels  8.5 x 11” = 3R4472
Xerox 24-up Copier Labels  8.5 x 11” = 3R4471
Xerox 30-up Copier Labels  8.5 x 11” = 3R4470
Xerox 33-up Copier Labels  8.5 x 11” = 3R4469

These Xerox Copier Labels are specifically made for use in 
copiers/printers.  Because of the wide variety of labels available, 
it is impossible to predict how other types will perform.

1 Run all label materials from the Paper Tray Bypass with the face 

side up.

2 Select Heavy Paper Mode. 

3 Run the recommended materials with the 11” edge as the lead 

edge. 

4 Fan the stacks before loading for optimum feeding. 

5 If a damaged or folded lead edge is found on jammed sheets, 

manually curl the lead edge down before loading to minimize 
jamming.

12 3. . .