Xerox 5760 参考指南

USAGE GUIDELINES

8

 MAJESTIK 5760/5765 MATERIALS USAGE GUIDE

The following guidelines have been developed as a result of 
extensive testing of the materials shown. Use these procedures to 
obtain the best performance from materials indicated with the Book 
and Magnifying Glass symbol.

Heavy-Weight Papers are those classified as greater than 28 lb 
bond (105 gsm). As compared to the primary 24 lb (90 gsm) papers, 
they offer increased stiffness but will generally have degraded 
image quality due to their rough surface and coarse formation.  An 
increase in jams is also likely.  Two-sided copying of heavy-weight 
papers is not recommended because of frequent jams and image 
quality problems.  Heavy-Weight Papers larger than 8.5 x 11 inches 
cannot be run in the 5760/5765.

Xerox 32 lb LXC (120 gsm) 8.5 x 11” = 3R4811
Xerox 90 lb Index (163 gsm) 8.5 x 11” = 3R3004
Hammermill 32 lb Laser Print 8.5 x 11” = 10464-6
Jupiter Thinplate 7 pt. (181 gsm) 8.5 x 11”
Canon 90 lb (157 gsm)

1 Run all Heavy-Weight Papers from the Paper Tray Bypass.

2 Select Heavy Paper Mode. (This cannot be selected for papers 

larger than 8.5 x 11 inches.)

3 Load all paper with curl down in the tray.  

4 All papers heavier than 32 lb (120 gsm) must be run with the 

grain parallel to the leading edge.  For example:
Run 8.5 x 11” long-grain with the 11” edge as the lead edge.

5 If jams occur, manually curl the lead edge down before loading to 

reduce jamming.

6 Improperly clearing heavy-weight jams can cause machine 

damage.  When clearing jammed sheets, first try clearing the jam 
from the Paper Tray Bypass.  Next, open the front door and turn 
knobs A, B and C in the direction shown by the arrows.  Finally, 
pull the Transfer Drawer out carefully to clear the jam.

CAUTION: Forcing the Transfer Drawer open may cause machine 
damage resulting in a service call.

12 3. . .