Xerox 5760 参考指南

USAGE GUIDELINES

MAJESTIK 5760/5765 MATERIALS USAGE GUIDE

19

Transparency stock is used primarily to create images that can be 
projected onto a wall or screen. Transparencies are made of 
polyester film that is specially coated to make dry ink (toner) readily 
adhere to it.  The base material and coating type are both very 
important in the final quality of the projected image.  The 
recommended Xerox transparencies meet the critical parameters for 
friction, clarity and toner adhesion required for optimum feeding and 
color image quality.  When run as described below, feeding 
performance will be good, but will not equal the reliability of 24 lb LX 
paper.

U.S.:
Xerox Removable Stripe, Good Quality, 8.5 x 11” = 3R3108
Xerox Removable Stripe, Premium Quality

, 8.5 x 11” = 3R5765

Xerox Painted Stripe, Good Quality, 8.5 x 11” = 3R5775

Canada:
Xerox Removable Stripe, Good Quality, 8.5 x 11” = 3R3108
Xerox Removable Stripe, Premium Quality

, 8.5 x 11” = 3R5765

Xerox Painted Stripe, Good Quality, 8.5 x 11” = 3R4894

1 Do not run Stripeless transparencies (those without a removable 

or painted lead edge white stripe), or Paper-Backed 
transparencies in the 5760/5765.  These will cause frequent jams 
and possible machine damage.

2 Remove all paper from the Paper Tray Bypass before loading 

transparencies.

3 Load all transparencies in the Paper Tray Bypass with the white 

stripe (removable or painted) at the leading edge.

4 All transparencies MUST be loaded with the removable or 

painted stripe side (dull side) DOWN in the tray.  Immediate jams 
and machine damage are likely to occur if incorrectly loaded.

5 Fan the stacks before loading for optimum feeding performance.

6 From the Paper Tray (Bypass) screen, select Paper/

Transparency mode for all  11” Removable Stripe 
Transparencies.  For 11” Painted Stripe Transparencies, select 
Transparency Interleave mode to provide the best feeding 
reliability.

12 3. . .