Xerox 8400B 用户指南

 

 

 

None 

Discover process cannot retrieve valid SNMP time-out values from PrinterMap ini 
file ([Drive]:\[Install Directory]\pmap.ini). Either the pmap.ini file cannot be 
found or the SNMP time-out entries are corrupt or missing. The following are the 
SNMP time-out entries as they should appear in the [discover] section of the 
pmap.ini file (shown with default shipped values in hundredths of a second): 

snmp_get_local_timeout=40 
snmp_get_remote_timeout=100 
snmp_set_timeout=200 
 

Default SNMP time-out values are used for all PrinterMap generated SNMP 
queries. Default values are: 

snmp_get_local_timeout default value is 400ms. 
snmp_get_remote_timeout default value is 1000ms. 
snmp_set_timeout default value is 20s. 
 

Verify the pmap.ini file exists and that the entries mentioned above are present.  

 

Local machine not configured for IP protocol support. 

None 

The discover process detected that PrinterMap is configured to do an IP network 
Discover. The local machine is not configured for IP protocol support. The 
discover process cannot continue. 

 

Discover process terminates. 

Verify the PrinterMap discover process is configured correctly and/or the local 
machine is properly configured for the IP protocol before attempting another 
PrinterMap discover. 

Local machine not configured for IPX/SPX protocol support. 

None