Xerox 8400B 用户指南

 

 

 

verify the printer(s) is/are responding. Verify the default SNMP time-out values 
specified in the user's guide are adequate.  

 

No printers discovered for default gateway, ip: $ip_address 

$ip_address - IP address of local machine's default gateway 

PrinterMap is configured to discover the specified default gateway, however, no 
printers were discovered. This is strictly an informational message, the discover 
process does not detect any errors. 

None 

Verify the specified default gateway does have SNMP capable network printers 
which should have been discovered. Use the "ping" command from a DOS prompt 
to verify the printer(s) is/are responding. Verify that the default SNMP time-out 
values specified in the user's guide are adequate.  

NOTE:   Routers may be configured to only maintain IP addresses in their ARP 

cache for a very short time. This can adversely affect the PrinterMap 
discover process which uses SNMP queries to retrieve the ARP cache of 
the router. The result can be that no printers are found via this discover 
method. 

No printers discovered for router, ip: $ip_address 

$ip_address - IP address of secondary router 

PrinterMap is configured to discover the specified router, however, no printers 
were discovered. This is strictly an informational message, the discover process 
did not detect any errors. 

None 

Verify that the specified router does have SNMP capable network printers which 
should have been discovered. Use the "ping" command from a DOS prompt to 
verify the printer(s) is/are responding. Verify  the default SNMP time-out values 
specified in the user's guide are adequate.