Xerox XJ6C 用户指南
Xerox DocuPrint XJ6C Ink Jet Printer
37
The paper does not stack neatly in the paper
output shelf
output shelf
Cause
Suggested Solution
There isn’t enough clearance
above the paper output shelf.
above the paper output shelf.
Place a sheet of paper in the
paper output shelf. Check the
clearance above the top of the
sheet. There should be 2 inches
of clearance.
paper output shelf. Check the
clearance above the top of the
sheet. There should be 2 inches
of clearance.
The star wheel assembly bar is
disengaged.
disengaged.
Open the printer cover. Reinstall
the star wheel bar by pushing
down on each end of the bar
until it snaps into position.
the star wheel bar by pushing
down on each end of the bar
until it snaps into position.
The star wheels are out of
position in the star wheel
assembly.
position in the star wheel
assembly.
Open the printer cover. Lift the
star wheel bar by grasping each
end of the bar and rotating it
toward the back of the printer.
Make sure the small wheels in
the star wheel assembly are not
pushed all the way inside the
rectangular slots and are able to
rotate freely. Then reinstall the
star wheel bar and close the
printer cover.
star wheel bar by grasping each
end of the bar and rotating it
toward the back of the printer.
Make sure the small wheels in
the star wheel assembly are not
pushed all the way inside the
rectangular slots and are able to
rotate freely. Then reinstall the
star wheel bar and close the
printer cover.
Low Ink Indicator LED is on
Cause
Suggested Solution
An ink in the cartridge is low.
Buy a new color ink cartridge or
high capacity black print
cartridge, as the ink will soon
run out.
high capacity black print
cartridge, as the ink will soon
run out.