Xerox XJ6C 用户指南

下载
页码 57
Xerox DocuPrint XJ6C Ink Jet Printer
39
Packing the printer for return to a Service
Center
Should you need to return the printer for servicing, follow
the packing instructions in this section.
Note:  Do not ship the power cord, printer cable, printer
driver disks, user guide, print head and ink cartridges, or
storage box, unless instructed to do so.
1.  Remove the print cartridge and place it in the print
head storage box.
2.  Close the printer cover and remove the paper output
shelf.
3.  Disconnect the power cord and the printer cable.
4.  Pack the printer in its original box using the original
packing material. If you do not have the original box,
continue with step 5. Otherwise, go to step 10.
5.  Completely wrap the printer in two layers of bubble
wrap (minimum thickness of 12.3 mm or 0.5”) and
tape the bubble wrap to keep it in place.
6.  Select a corrugated box large enough to allow at least
50.8 mm (2”) between the bubble-wrapped printer
and the walls of the box. Make sure the strength of
the box is at least 275 lb test.
7.  Fill the bottom of the box with 75 to 100 mm (2” to
3”) of loose fill.
8.  Place the bubble-wrapped printer in the center of the
box.