Xerox 200e 用户手册

Bootstrap protocol, BOOTP, is the recommended way to establish 
communications from the host to the printer in an internet protocol 
environment. BOOTP obtains booting data from the bootptab Þle. With the 
proper information stored in the bootptab Þle, the printer can Þnd its own 
name and IP address and boot from the network without any intervention, 
even for a Þrst time boot.

Verify that the bootpd and bootptab Þles are in the /etc or /usr/etc 
directory:

Edit the /etc/hosts Þle to add the printer internet addresses and 
names:

128.07.60.30   P480-mktg

128.07.60.31   P480-sales

Some hosts may require an explicit update to the arp table to add 
the new entries.  This command is host-speciÞc; check your host 
documentation for details.

The ether switch indicates you are providing an Ethernet address. The arp 
command can also be run with a -f Þlename option, where Þlename is a Þle of 
all the printer entries to set.

Set up the bootptab Þle.

Start or restart the inetd or bootpd daemon.