Xerox 200e 用户手册

Check the following items:

Verify that the printer has been set up to service the queue:

Using the Advanced ConÞguration Tool, select ConÞgure 
queue 

under Advanced conÞguration.  Select the appropriate 

Þle server and queue; then select Queue servers.

Using PCONSOLE, see ÒSelecting queues for the printerÓ on 
page 4-22.  

Check that the printer was able to log in to the Þle server:

At the Þle serverÕs console, type:

Select Connection Information from the Available Options 
menu.  

If the printer has logged in, its print server name is displayed in 
the list.  If the print server name is not on the list, continue with 
Steps 3 through 6.

Verify that there was an available connection slot for the printer.  
Since the printer consumes a login connection, the Þle server may 
need an available connection for the printer to log in.

Verify that the password the printer saved (if one was set) is the 
same as the one on the Þle server.  Mismatched passwords can 
result if PCONSOLE, rather than the Advanced ConÞguration 
Tool, is used to set the password.  Use the Advanced 
ConÞguration Tool to enter a new password to ensure that they 
are the same.  To set a password, choose Login password from the 
ConÞgure print server (printer) 

menu (Advanced conÞguration).