Xerox 200e 用户手册

Verify that the printerÕs print server name matches the one created 
on the Þle server.  The conÞguration page reports the printerÕs 
print server name.  For information on printing the conÞguration 
page, see ÒYour printerÕs conÞguration pageÓ on page 2-3.

Verify that set allow encrypted passwords=on has been set.  See 
ÒAllowing unencrypted passwordsÓ on page 4-3.

Verify that the frame type the printer is using is supported by the 
Þle server.  See ÒPrinter does not appear in the Advanced 
ConÞguration ToolÓ on page 4-25.

■

Use the Advanced ConÞguration Tool to check the printerÕs status.  
Select Print server status under the Status menu.

■

You can use PCONSOLE to check the print job.  Select the queue 
where the job was sent, then select the Current Print Job entries to 
view the jobs.  If the job is being serviced it will indicate this along 
with the name of the print server servicing the job.

■

If the Þle contains control characters, make sure that control 
character Þltering is enabled (the factory default).  If necessary, 
enable Þltering by sending the PostScript Þle FILTER.PS to the 
printer.  FILTER.PS is in the NET-UTIL directory on the PC version 
of your printerÕs network utilities diskettes.