Xerox 360 补充手册
3
Repacking the Color Printer and Its Accessories
Locking the transit restraint
Caution
To avoid damaging the printer, always lock the transit restraint before moving or
shipping the printer.
1.
Locate the transit restraint on the right side of the printer.
2.
Insert a wide flat-blade screwdriver into the transit restraint slot.
3.
While pressing inward with strong pressure, turn the transit restraint slot
clockwise
to
lock the printhead in place. If you have trouble turning the lock, consider the
following suggestions:
following suggestions:
■
Make sure that the printer was turned off using the
On/Off
switch.
This places the printhead in the proper position for locking. If you
are in doubt about how the printer was turned off, turn the printer on
again. After waiting for a minute, turn the power off using the
are in doubt about how the printer was turned off, turn the printer on
again. After waiting for a minute, turn the power off using the
On/Off
switch.
■
You may need to press inward on the lock with more force before you
can turn the lock
can turn the lock
clockwise
.
32434-03
2
3
1
!