Xerox 750P 用户指南

Startup Page prints even though it is disabled

If the printer detects a non-fatal error at power-up (for example, faulty printer ports and 
some memory failures), the Startup Page prints, even if you have disabled it. In this case, 
the page contains one or more of the error messages listed in the following table. 
Depending on your needs, you may not need to call for service immediately.

PostScript printing errors

If your printer reports a PostScript error when printing from Adobe PageMaker, Adobe 
FreeHand, QuarkXPress, or Canvas, you may be using an older or incorrect version of the 
PostScript Printer Description File (PPD). Refer to the printer’s Setup Guide for 
instructions on installing printer description files. 

Use the most current printer description file. To determine the date of the file you are 
using, do the following:

■

Select a printer description file. 

■

From the File menu, choose Get Info. Make a note of the file’s version date.

■

In the File Manager, check a printer description file’s creation date. 

■

Make a note of the file’s version date.

■

In the Windows Explorer, check a printer description file’s creation date. 

■

Make a note of the file’s version date. 

Check the Tektronix web site listed below to see if the printer description files you 
have are the most recent. If the files are not recent, download newer files from the 
web: www.tek.com/Color_Printers/

If the printer displays PostScript printing errors, refer to the TekSMART knowledge base 
for solutions: www2.tek.com/TekSMART/

In the Go to a specific document number field, enter the number 35441 and click Go.

A list of solutions for PostScript errors appears. Most common PostScript error 
problems are resolved in the article, General Troubleshooting Guide for PostScript 
Errors.

Parallel Port failed

I/O Card failed

The named port is not working. The other ports can still 
be used.

DRAM SIMM x failed

One of the memory SIMMs is not working. In this message, 
x indicates the number of the SIMM that failed. Since the 
printer’s base memory is still working, the printer can still 
be used, but throughput may suffer.