Xerox 740 安装指导
Windows 95 and Windows 98: PhaserPort Software
6
Setup Guide
41
Adding a port to an existing printer
Use this procedure to add a port after you have installed the printer.
1.
Select your printer:
a.
From the Start menu, select Settings, then click Printers.
b
In the Printers window, right-mouse click on your printer.
2.
From the pop-up menu, choose Properties.
3.
When the properties dialog for the printer is displayed, click Details.
4.
Click Add Port, then select Other.
5.
Highlight PhaserPort and click OK; this displays the Add PhaserPort
dialog.
dialog.
a.
In the Description field, enter a name for the port (this can be the
printer name/model, location, or any other descriptive name of
your choice), such as Phaser 740.
printer name/model, location, or any other descriptive name of
your choice), such as Phaser 740.
b.
In the Name/Address field, enter the IP address or DNS name of
the printer (for example, 192.1.1.2).
the printer (for example, 192.1.1.2).
c.
Click OK.
6.
Click OK again to apply the changes; the printer driver is now
configured to use your new PhaserPort.
configured to use your new PhaserPort.
If you don’t know the printer’s IP address or DNS name, click Browse
to display a list of printers on the network. Double-click the printer
you want; PhaserPort automatically enters the information into the
Add PhaserPort
to display a list of printers on the network. Double-click the printer
you want; PhaserPort automatically enters the information into the
Add PhaserPort
dialog. To search the network again, click Refresh; to
narrow down the search by using subnets, click Advanced.