Xerox 740 安装指导
6
Windows 95 and Windows 98: PhaserPort Software
42
PhaserShare Networking
Changing a port’s IP address
If the IP address of the printer is changed, change the IP address of the
corresponding port:
corresponding port:
1.
Select your printer:
a.
From the Start menu, select Settings, then click Printers.
b.
In the Printers window, right-mouse click your printer, then click
Properties
Properties
.
2.
In the Properties dialog, click Details.
3.
Verify that PhaserPort appears in the Print to the following port field
and click Port Settings.
and click Port Settings.
4.
In the Configure PhaserPort dialog, enter the correct IP address or
DNS name for the printer.
DNS name for the printer.
5.
Click OK.
6.
Click OK again to apply the changes.
If you don’t know the printer’s IP address or DNS name, click Browse to
display a list of printers on the network. Double-click the printer you
want; PhaserPort automatically enters the information into the Add
PhaserPort
display a list of printers on the network. Double-click the printer you
want; PhaserPort automatically enters the information into the Add
PhaserPort
dialog. To search the network again, click Refresh; to narrow
down the search by using subnets, click Advanced.