Xerox 8855 补充手册
XES Synergix 8855 Controller Setup Manual for Firmware 7.0
8
Controller Specifications
Physical Characteristics
The controller is a tower positioned adjacent to the XES Synergix 8855
Printer.
Printer.
Electrical Requirements
100 - 250 VAC auto-ranging power supply.
Agency Approvals
Safety:
UL 1950, CA22.2 No. 950 (CUL), EN 60950 (CE Mark)
EMC:
CE Mark, FCC Class A, Canada Radio Interference Regulations
Class A, VCCI Class 1
Class A, VCCI Class 1
Hardware Specifications
CPU
Power PC 740 operating at 200 Mhz clock speed.
RAM
Maximum RAM is 192 MB
Hard disk
Ultra SCSI, 7200 rpm internal hard disk drive
I/O Ports
Serial
Two 9 pin serial ports provided. The scanner uses one when this
option is connected. The second is used as an input port for
receiving data via serial port connection.
option is connected. The second is used as an input port for
receiving data via serial port connection.
Parallel
(IEEE 1284 Compliant) High-density port connector provided.
SCSI
50-pin SCSI Connector provided.
VPI
37 pin D Connector provided.
Scanner
68-pin SCSI Connector provided.
Ethernet
Built-in 10/100 Ethernet Network Interface: RJ-45 connection,
supporting TCP/IP only.
supporting TCP/IP only.
Note: An optional, external Ethernet adapter, attached to the
Controller's parallel port, provides additional support for TCP/IP,
IPX/SPX, and NetBEUI protocols. Contact your XES sales or
service representative for specific ordering and setup
information.
Controller's parallel port, provides additional support for TCP/IP,
IPX/SPX, and NetBEUI protocols. Contact your XES sales or
service representative for specific ordering and setup
information.