Xerox 8855 补充手册
XES Synergix 8855 Controller Setup Manual for Firmware 7.0
14
Preparing the Parallel Port
Parallel Port
This port requires connecting a parallel cable between your workstation
parallel port and the controller parallel port. An appropriate software print
driver or system command is necessary to direct jobs to the printer.
parallel port and the controller parallel port. An appropriate software print
driver or system command is necessary to direct jobs to the printer.
Software Supported:
PC/WINDOWS 95 AND WINDOWS 98 PLATFORMS:
• HP RTL Print Driver
• ADI Drivers for AutoCAD R13/14
• HDI Drivers for AutoCAD 2000 and 2000i
• PostScript PPD System Print Driver
• Document Submission Tool (part of AccXES Client Tools)
PC/WINDOWS NT 4.0 AND WINDOWS 2000 PLATFORMS:
• HP RTL/HP-GL/2 Print Driver
• ADI Drivers for AutoCAD R13/14
• HDI Drivers for AutoCAD 2000 and 2000i
• PostScript PPD System Print Driver (NT 4.0 only)
• Document Submission Tool (part of AccXES Client Tools)
DATA FORMATS SUPPORTED
• HP-GL,
HP-GL/2
• HP-RTL
• TIFF,
NIRS
• CALS 1 & 2
• CalComp 906/907/951 PCI with Electrostatic extensions
• CGM
• VCGL
• VDS
• C4
• Filenet
• PostScript 3 with PDF(option)
Parallel Cable Description
The cable connector is a standard, “mini-Centronics” P1284C connector.
A ten foot, high density P1284A to P1284C cable is available (Xerox part
number 98S03302).
number 98S03302).
The maximum length of the parallel cable must not exceed 12 feet (3.66 m).