Xerox 8855 补充手册
XES Synergix 8855 Controller Setup Manual for Firmware 7.0
16
Preparing the 10/100 Ethernet
Port
Port
Overview
The controller contains an embedded 10/100Mhz Ethernet network interface
port.
port.
Enable Controller Ethernet Port
Use the Printer_Defaults>Network>TCP-IP menu of the Web PMT to set the
net mask, IP address, gateway.
net mask, IP address, gateway.
Refer to the Web Printer Manager Tool User Guide for full instructions .
Figure 7 - Typical Web PMT, TCP-IP Setup Page
Note: Save the TCP/IP Recovery file to the workstation hard drive. The
file is necessary to re-enter the Ethernet settings if they become corrupt.
file is necessary to re-enter the Ethernet settings if they become corrupt.
Figure 8 - Typical Screen for Saving a Recovery file in Web PMT