Xerox 242 软件指南

After your Xerox customer representative installs and configures 
Remote Services, you can immediately access the Home page. 
The Home page provides links to all application features included 
within Remote Services.

NOTE: For Remote Services registration information, please refer 
to the Remote Services Setup Guide.

You can use the following links to access topics discussed in this 
section:

Before Remote Services is ready to provide full service, settings 
for your network configuration need to be verified by your Xerox 
customer service representative. If your system uses a proxy 
server, settings to enable the network connection are defined as 
follows:

1. Open the [Remote Services Home: Setup: Network 

Settings] page.

2. Enter the HTTP Proxy Server, HTTP Proxy Port, user name 

and password.

3. Click [Apply New Settings].

Additionally, your customer service representative must verify 
settings for IP Address, Netmask, Gateway and DNS Host on the 
[Remote Services Home: Setup: Network Settings] page. As 
these settings are read-only in the Remote Services application, 
the settings are edited through DocuSP Setup.

Once these settings are configured, Remote Services is ready to 
provide full network service.

Or, click Restore Settings if you do not want to modify the 
capture settings and you want to restore the settings that were 
saved last.