Xerox 6121MFP 用户指南
Troubleshooting
Phaser 6121MFP Multifunction Printer
User Guide
User Guide
204
Problems Sending Faxes
Symptom
Cause
Solution
The document is scanned at an
angle.
angle.
The document guides are not
adjusted to the width of the
document.
adjusted to the width of the
document.
Slide the document guides to fit the
width of the document.
width of the document.
The fax received by the
recipient is blurry.
recipient is blurry.
The document is incorrectly
positioned.
positioned.
Position the document correctly.
See
See
The document glass is dirty.
Clean the document glass. See
The text in the document is printed
too faint.
too faint.
Adjust the resolution or the density.
See
See
page 123, and
There may be a problem with the
telephone connection.
telephone connection.
Check the telephone line and then
try sending the fax again.
try sending the fax again.
There may be a problem with the
recipient’s fax machine.
recipient’s fax machine.
Make a copy to verify that this
printer is operating correctly and
then, if the copy printed correctly,
have the recipient check the
condition of their fax machine.
printer is operating correctly and
then, if the copy printed correctly,
have the recipient check the
condition of their fax machine.
The fax Lighten/Darken setting is
too light.
too light.
Darken the fax. See
The fax received by the
recipient is blank.
recipient is blank.
The document was sent with the
front side facing down (when the
auto document feeder is used).
front side facing down (when the
auto document feeder is used).
Load the document faceup in the
auto document feeder.
auto document feeder.