Xerox 6121MFP 用户指南
Installation and Setup
Phaser 6121MFP Multifunction Printer
User Guide
User Guide
34
Phaser 6121MFP/D Printer Configuration with Options
The image below shows the printer configuration with all available options including the second tray
and the duplex unit.
and the duplex unit.
3. After positioning the printer, you are ready to connect it to the power source and computer. Go to
the next section,
Connecting the Printer
Note:
Connect the printer via Ethernet or USB. A USB connection is a direct connection and is not
used for networking. An Ethernet connection is used for networking. An Ethernet connection is
faster than a USB connection. Hardware and cabling requirements vary for the different
connection methods. Cabling and hardware are generally not included with your printer and must
be purchased separately.
faster than a USB connection. Hardware and cabling requirements vary for the different
connection methods. Cabling and hardware are generally not included with your printer and must
be purchased separately.
1. Attach the cables:
•
If you have a Phaser 6121MFP/S printer configuration, you will connect the printer to your
computer via a standard A/B USB 2.0 cable.
computer via a standard A/B USB 2.0 cable.
•
If you have a Phaser 6121MFP/N or /D printer configuration and your computer is connected
to a network, connect the printer to the network using a standard Ethernet cable (category 5,
RJ45). If you do not have a network, connect the printer to your computer using a standard A/B
USB 2.0 cable.
to a network, connect the printer to the network using a standard Ethernet cable (category 5,
RJ45). If you do not have a network, connect the printer to your computer using a standard A/B
USB 2.0 cable.
2. If you have a Phaser 6121MFP/N or /D printer configuration and plan to use the fax feature,
connect the printer to a phone line for sending and receiving faxes. For safety information, see
3. Attach the power cord and then plug in the printer and turn it on. For safety information, see
4. (USB connections only.) If the Found New Hardware Wizard appears on your computer screen
after you plug in the printer, click the Cancel button.
5. Go to
814 mm (32.0")
794 mm
(31.3")
(31.3")
100 mm (3.9")
154 mm (6.1")
116 mm (4.6")
714 mm (28.1")
560 mm (22.0")