Xerox 6121MFP 用户指南

Installation and Setup

Phaser 6121MFP Multifunction Printer

User Guide

35

Initial Setup at the Control Panel

This section includes:
•

•

•

•

The first time you turn the printer on, the Initial Setup menu on the printer control panel prompts you 
to select your language. If you have a Phaser 6121MFP/N or /D printer configuration, you will also be 
prompted to configure regional fax settings.

Configuring the Phaser 6121MFP/S

Note:

These instructions are for setting up the Phaser 6121MFP/S printer configuration. If you are 

not sure what type of printer configuration you have, see 

To configure the Phaser 6121MFP/S:
1. After the printer is turned on for the first time, you are prompted to select the language. On the 

printer control panel, use the Down Arrow button to select your language and then press the OK 
button.

2. Use the keypad buttons to enter the date and the time in the format shown in the menu.
3. Press OK.
4. Select the units of measurement you want the printer to use when enlarging or reducing images:

5. Press OK.

You are done with the initial setup. Continue to 

Configuring the Phaser 6121MFP/N or /D

Note:

These instructions are for setting up Phaser 6121MFP/N or /D printer configurations. If you 

are not sure what type of printer configuration you have, see 

To configure a Phaser 6121MFP/N or /D:
1. After the printer is turned on for the first time, you are prompted to select the language and fax 

settings. On the printer control panel, use the Down Arrow button to select your language and 
then press the OK button.

2. Arrow down to your country and press OK.