Xerox 7228 用户指南

24 

Configuring SNMP Community Names with Internet Services 

1.  Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  

Press Enter. 

2. Click 

the 

 Tab. 

3.  Click the plus symbol (+) to the left of the Protocol Settings file folder. 

4. Select 

 in the directory tree. 

5.  Enter a name for the Community Name (Read-Only).  This is the password for SNMP GET requests 

from the SNMP Manager to the Agent in the Device. 

6.  Enter a name for the Community Name (Read-Write).  This is the password for SNMP SET 

requests from the SNMP Manager to the Agent in the Device. 

7.  Caution:  If you change the GET and/or SET Community Names, you must also change the names in 

all network applications that are communicating by SNMP with this Device. 

8.  Enter a name for the Community Name (Trap Notification).  This is the default password for SNMP 

TRAPS sent from the device to the Manager by SNMP. 

9.  Optionally enter the System Administrator's name for packet identification purposes. 

10. Click Apply to accept the changes, or Undo to return the settings to their previous values.