Xerox 7228 用户指南

25 

There are two Administrator Passwords that control access to the Device's feature settings.  One 
password is a numeric password that controls access through the Device's Control Panel.  The second 
password is an alphanumeric password that controls access through the Device's Internet Services 
(embedded HTTP server application residing in the Device). 

 

To Change the Numeric Password on the Device's Control Panel 

1. Press 

the 

 on the Control Panel. 

2. Press 

the 

 on the numeric keypad five consecutive times.  This is the factory default 

"password." 

3.  Press the rectangular Confirm button on the touch screen. 

4. Press 

the 

 (the right-hand button of the two buttons displayed on the touch 

screen).  Note:  If you press the left button by mistake, the Main menu will be displayed and you will 
have to start over at step one above. 

5. Press 

the 

. 

6. Press 

the 

. 

7.  On the Login ID screen, select the On button. 

8.  Press the keyboard button, and use the displayed keyboard to enter in a new numeric Login ID 

ranging from 1 to 32 characters in length. 

9. Press 

the 

 button. 

10.  Press the keyboard button, and use the displayed keyboard to enter in your new numeric Login ID a 

second time and press Save again. 

11. Press Save on the Login ID screen to save the new Login ID. 

12.  To exit the System Administrator Settings screen, press the rectangular Close button in the upper 

right corner of the screen. 

13. Press the Exit button and the Device’s Main screen should now be displayed.