Xerox pro 16fx 用户指南
46
Fax Setup
Storing Numbers for Automatic Dialing
Automatic Dialing is a quick and convenient way to dial by using only a Rapid key (Rapid Key
Dialing), or pressing the Speed Dial/Search key and entering a two-digit number (Speed Dialing).
Dialing), or pressing the Speed Dial/Search key and entering a two-digit number (Speed Dialing).
Storing Numbers
To use Automatic Dialing, you must first store the full telephone number. The way you store it
depends on whether you want to use it for Rapid Key Dialing or Speed Dialing:
depends on whether you want to use it for Rapid Key Dialing or Speed Dialing:
Use the following procedure to store numbers for Rapid Key Dialing or Speed Dialing:
Step
Press these keys
Comments
1
Menu
then 3
Display = “ENTRY MODE”
2
1
Display = “FAX NUMBER MODE”
3
1
Display = “FAX NUMBER SET”
4
Example: Rapid Key 01
01
Example: Speed Dial 75
75
To store a Rapid key number, press a Rapid key. To
store a Speed Dial number, press two number keys
(“00” to “99”).
store a Speed Dial number, press two number keys
(“00” to “99”).
Display = “PRESS ENTER KEY”
5
Enter
Display = “ENTER FAX NUMBER”
6
Example:
8005551234
8005551234
Enter the fax telephone number (maximum of 20 digits
including pauses) using the number keys.
including pauses) using the number keys.
7
Enter
Display = “ENTER NAME”
8
Example: Xerox
999 = x
333 = e
7777 = r
6666 = o
999 = x
999 = x
333 = e
7777 = r
6666 = o
999 = x
Enter the name of the location or party by pressing
number keys as described in Entering Characters in
the Fax Control Panel chapter. If you do not want to
enter a name, skip this step.
number keys as described in Entering Characters in
the Fax Control Panel chapter. If you do not want to
enter a name, skip this step.
9
Enter
Display = “CHAIN DIAL”
10
1
or
2
Press “1” if you want to specify the number as a Chain
Dialing number (refer to Chain Dialing in the Sending
a Fax section). Otherwise, press “2”.
Dialing number (refer to Chain Dialing in the Sending
a Fax section). Otherwise, press “2”.
Ä