Xerox xi70c 用户指南
8
Installation
(continued)
Loading paper
1. Raise the output tray, to simplify
access to the automatic feeder.
2. Pull out the adjustable paper length
guide on the input tray and make sure
that its adjustable side guides are
completely open.
Note the maximum fill indicators on
the side guides.
that its adjustable side guides are
completely open.
Note the maximum fill indicators on
the side guides.
3. After fanning the paper thoroughly,
load it as a single stack on the input
tray, inserting it carefully until it stops
inside the machine.
tray, inserting it carefully until it stops
inside the machine.
The surface to be printed should be
face downwards in the paper tray. This
is especially important for ink jet media
which is coated on one side.
face downwards in the paper tray. This
is especially important for ink jet media
which is coated on one side.
4. Close the side guides against the
paper margins and the paper length
guide against the trailing edge. Make
sure the paper height is below the
maximum fill line on the side
guides.
guide against the trailing edge. Make
sure the paper height is below the
maximum fill line on the side
guides.