Xerox xi70c 用户指南
9
Installation
(continued)
5. Lower the output tray to its operating
position.
During WorkCentre operation, the side
guides on the output tray must remain
open and the paper length guide
should be positioned to accommodate
the paper size used (LETTER, LEGAL,
A4 are marked on the paper length
guide).
guides on the output tray must remain
open and the paper length guide
should be positioned to accommodate
the paper size used (LETTER, LEGAL,
A4 are marked on the paper length
guide).
Connecting your WorkCentre
Be sure to power off the WorkCentre
and PC.
and PC.
1. Plug the connector of the parallel
cable that comes with your
WorkCentre into the socket on the
rear of the machine and close the
spring clips on it.
WorkCentre into the socket on the
rear of the machine and close the
spring clips on it.
2. Connect the other end of the parallel
cable to the appropriate port on your
computer.
computer.
3. Insert the power cord in the
receptacle on the rear of the machine.
4. Plug the other end of the power cord
into a nearby wall outlet.
The outlet should only supply
power to your WorkCentre and not
be shared.
power to your WorkCentre and not
be shared.