Gestetner c7006dw 操作指南

Error & Status Messages

41

Reset Paper Tray 
Correctly

The paper tray is not in-
stalled correctly.

Install the paper tray cor-
rectly.

The tray on the paper feed-
ing path was not set cor-
rectly when the printer 
received the print job.

Install the paper tray cor-
rectly. The printer will re-
start printing 
automatically.

Reset Waste T 
Bottle Correctly

The waste toner bottle is 
not installed. 

Install the waste toner bot-
tle. 

Warming Up

The printer is preparing for 
printing.

Wait until the printer is 
warmed up.

The printer adjusts itself 
regularly to maintain print 
quality. (This message 
might appear while print-
ing.)

It is not an error message.

The printer is working 
properly. Just wait a while.

Waste T Full

(on the lower line)

The waste toner bottle is 
nearly full.

Replace the waste toner 
bottle. 

Waste Toner is 
Full 

The waste toner bottle is 
full.

Replace the waste toner 
bottle. 

A3:Error

There is too much data for 
the I/O buffer to handle.

Check if the interface cable 
is inserted into the printer 
and the computer securely. 

Check if the interface cable 
is not damaged or broken.

Increase the size of the I/O 
buffer. 

A6:Error

There is not enough printer 
memory to print one or 
more of the pages in the 
print job.

See P.118 “Low Memory”.

AB:Error 

The printer is unable to 
process the data you are 
trying to print.

Install optional memory 
unit to increase the amount 
of printer memory.

Reduce the amount of data 
being sent to the printer.