Gestetner c7006dw 操作指南

Error & Status Messages

43

*1

This message appears when you use the duplex printer.

❒ If you cannot solve the problem by taking above actions, turn the printer off

and on. If this does not clear the error message, write down the error number
and the message, and contact your sales or service representative.

B7: Error

An error has occurred in 
the optional Network In-
terface Board.

Turn the printer off and on. 
Then, try to print again.

Turn off the printer. Re-
move and reinstall the Net-
work Interface Board and 
turn on the printer. Then, 
try to print again.

Turn off the printer. Re-
move the Network Inter-
face Board from the printer 
and turn on the printer. 
Then, try to print again.

❒ If you remove the Net-

work Interface Board, 
you cannot print via the 
network. You can send 
the print job to the print-
er only via a parallel ca-
ble connection.

85:Error

The printer has run out of 
frame memory. There is 
not enough memory to ren-
der the graphic data. 

Reduce the size of the input 
buffer, or add optional 
memory.

86:Error

You may be trying to print 
with the wrong printer 
driver.

Confirm that you are using 
the correct printer driver.

You might not use the cor-
rect interface cable.

Confirm that you are using 
the correct interface cable.

91:Error

An error has occurred in 
the printer's standard 
memory.

Turn the printer off and on. 
Then, try to print again.

94:Error

The amount of the memory 
is not set correctly.

Specify the correct amount 
of memory using the print-
er driver.