Gestetner c7528 操作指南
Using a Printer Server
272
B
Start NIB Setup Tool from the [Start] menu.
C
Click [Wizard], and then click [OK].
D
Select the printer you want to configure, and then click [Finish].
A dialog box prompting you will need to perform the remaining configuration
tasks in the Web browser appears. Click [OK], and then wait until Web Image
Monitor starts automatically.
tasks in the Web browser appears. Click [OK], and then wait until Web Image
Monitor starts automatically.
E
The dialog box for entering the user name and password appears.
Enter the user name and password, and then click OK.
❒ For details about the password, consult your network administrator.
F
Click [Configuration] in the left area, click [Network], and then click [NetWare].
The following items are displayed:
• Print Server Name: Enter the NetWare print server name. If you want to
use the interface board as a print server, enter the name of a print server
that is not active on the file server. 1 to 47 characters can be used.
that is not active on the file server. 1 to 47 characters can be used.
• Logon Mode: Specify whether you will designate a file server or NDS tree
when logging on to NetWare.
• File Server Name: When a file server name is entered here, only the spec-
ified file server is searched for. This item is mandatory. Up to 47 characters
can be used.
can be used.
• NDS Tree: If you want to enable the NDS mode, enter the name of the NDS
tree you want to log on to using up to 32 one-byte alphanumeric characters.
• NDS Context Name: If you want to enable the NDS mode, enter the print
server context using up to 127 characters.
• Operation mode: Specify whether to use the interface board as a print serv-
er or a remote printer.
• Remote printer number: This item is effective when you have specified that
the interface board be used as a remote printer. Enter the same number as
the number of the printer to be created on the print server, using 0 to 254
one-byte characters.
the number of the printer to be created on the print server, using 0 to 254
one-byte characters.
• Job Timeout: When the interface board is running as a NetWare remote
printer, the printer cannot judge when a print job ends. Therefore, the print-
er terminates printing when a certain period of time has elapsed since the
last time it has received print data (i.e., when it has not received print data
for a certain period of time). Specify here this period of time (3 to 255 sec-
onds) using one-byte characters. The initial value is 15 (seconds).
er terminates printing when a certain period of time has elapsed since the
last time it has received print data (i.e., when it has not received print data
for a certain period of time). Specify here this period of time (3 to 255 sec-
onds) using one-byte characters. The initial value is 15 (seconds).
• Frame Type: Select the frame type to be used from the drop-down menu.
• Print Server Protocol: Select the protocol to be used for NetWare from the
drop-down menu.